Midwest Tool & Cutlery Co. in Sturgis,

Midwest Tool & Cutlery Co.

Popular Snips (MWT-6510L) - Cuts straight and tight left curves. Easiest used in the right hand. Bottom blade serrated.

Popular Snips (MWT-6716S) - Cuts straight and wide curves to the left and right. Use in either hand. Serrated blades.

Popular Snips (MWT-6510R) - Cuts straight and tight right curves. Easiest used in left hand. Bottom blade serrated.

Portable Work Surface (MWT-PWS01) - The Portable Work Surface has two-height positioning so it can be used as scaffolding in the lower position and a work table in the upper position. With a built-in power strip, reversible work surface and weighing just 30 pounds, the PWS if fully portable, powered, and adjustable, minimizing the strain of working on flimsy make-shift tables or on the ground.

1/4â²â² X 1-5/8â²â² Hex Driver Bit 20 Pack (MWT-MSH14)

Hex shank drive to female hex with rare earth magnetic insert. Precision forged for exceptional strength and durability. 1/4 female hex, Magnetic insert, Precision forged. Made in the USA.

Hex shank drive to female hex with rare earth magnetic insert. Precision forged for exceptional strength and durability. 3/8 female hex, Magnetic insert, Precision forged. Made in the USA.

MIDWESTÂ® Cable Cutter features M2 alloy steel blades capable of cutting spring hardened wire to 3/32â²â²(2.4mm), wire rope to 5/32â²â²(4mm), stainless steel wire rope to 1/8â²â²(3.2mm) and a mild steel rod to 1/8â²â²(3.2mm) diameter. Cleanly cuts both cable and hard wire. Cuts hardened round diameter materials up to 5/32â²â² (4mm). Use in either hand. Compound leverage handle action. Hardened M2 alloy steel blade inserts resist nicks and chipping. Use to cut wire rope cable, spring hardened wire, and mild steel rod. US Patent 6088920 UPC: 7 27226 13097 6

MIDWESTÂ® 2-Pc. Offset Aviation Snip Sets are the top selling aviation snip sets to the sheet metal trade. This set includes models MWT-6510L and MWT-6510R for best maneuverability cutting full sheets or tight curves in any direction. Offset aviation snips cut Pinch-Thru-point, requiring fewer rebites and accurate trim cuts. Offset blades channel sharp material edges away from users hand allowing for easier long cuts. blade pivot bolt is threaded into bottom blade keeping blades in adjustment for ease of operation. Makes left cuts thru thick material. Bottom blade is serrated in order to grip material. Kush'n-Power grips comfort the users hands and reduce fatigue. Made in the USA.

MIDWESTÂ® Offset Straight Aviation Snips flow material away from blades and position user's hand above material for best maneuverability cutting full sheets with extra cut length. Use in either hand. Offset aviation snips cut Pinch-Thru-point, requiring fewer rebites and accurate trim cuts. Offset blades channel sharp material edges away from users hand allowing for easier long cuts. blade pivot bolt is threaded into bottom blade keeping blades in adjustment for ease of operation. Makes straight cuts & wide left and right cuts thru thick material. Bottom blade is serrated in order to grip material. Kush'n-Power grips comfort the users hands and reduce fatigue. Made in the USA.

The Rock-n-Snap band breaker is designed to break steel banding with a simple rocking motion. Perfect for material handling. A 19â²â² handle provides more than enough leverage to break extra wide banding. Made in the USA.

The Undercutter is a material handling tool designed to cut steel banding. It can be used on steel, nylon and plastic. blade pivot bolt is threaded into bottom blade keeping blades in adjustment for ease of operation. Kush'n-power grips comfort users hands and reduce fatigue. Made in the USA

Bottom blade wedge design, Hot drop forged blades stay sharp, Special purpose is cutting strapping / banding. Made in the USA.

Replacement jaws for the 1-1/2-inch nibbler. Made in the USA.

Use to elongate rail hole in posts required to rack fence rails or section over a slope or grade. Variable leverage handle action. Long aluminum handles. Replaceable cutter jaws. Clean cutting action. Self-aligning to existing post rail hole opening. nibbles away 1/4â²â² depth of material per stroke. Made in the USA.

Replacement jaws for the 2-inch nibbler. Made in the USA

Extended barrel fits through 5/8â²â² diameter hole. Uses 3/16â²â² aluminum trifold rivets. Molded grips comfort users hand. Extended barrel and nose piece manufactured in the USA. Rivet gun imported.

Comes with Interchangeable nosepieces. Can handle aluminum, Copper, Steel, or Stainless steel rivets. Heavy duty model. Molded grips comfort users hands. Made in the USA

Low shear aluminum trifold type rivets require less than 500 pounds pull strength. Stocked in plain and white. Other colors available upon request.

Serrated cutting edges securely grip material for easier cutting. Made in the USA

Use to tighten cable tie securing flex duct to fittings. Cutter handle trims Excess Cable. Handles all types of nylon cable ties including thin designs.

MIDWESTÂ® Flex Duct Combo Tool combines two essential flex duct tools into one. The 5â²â² (12.7 cm) stainless steel, resharpenable double blade has both standard and serrated edges, which allows for cutting in both directions. It's compound leverage wire cutter makes for convenient easy cutting of the flex duct wire without changing tools mid job. The wire cutter features a M2 alloy steel cutting blade, providing a long-lasting cut edge. Included is a ripstop nylon sheath for safe storage.

MIDWESTÂ® Flex Duct Knife, designed for cutting flexible duct and duct board has a rubberized tapered finger grip handle for comfortable slip resistant use. The 5â²â² (12.7 cm) stainless steel, resharpenable double blade has both standard and serrated edges, which allows for cutting in both directions. The knife includes a ripstop nylon sheath for safe storage.

Cuts straight. Use in either hand to cut thick materials, multiple layers of materials, seams, etc. Serrated blades. UPC: 7 27226 13036 5

Special Hardness snips are designed to cut through hardened materials such as Stainless steel, Inconel, and Titanium with ease. Offset aviation snips cut Pinch-Thru-point, requiring fewer rebites and accurate trim cuts. Offset blades channel sharp material edges away from users hand allowing for easier long cuts. blade pivot bolt is threaded into bottom blade keeping blades in adjustment for ease of operation. Makes left cuts thru thick hardened material. Both Bottom & top blades are serrated in order to grip material. Kush'n-Power grips comfort the users hands and reduce fatigue. Made in the USA.

Special hardness snips are designed to cut hardened metals such as stainless steel, Inconel, or Titanium with ease. They can make both straight and wide cuts to the right. blade pivot bolt is threaded into bottom blade keeping blades in adjustment for ease of operation. Top and bottom serrated blades grip material during cutting in order to create a clean edge. Kush'n-power grips comfort users hands and reduce fatigue. Made in the USA.

Cuts straight and wide curves to the left and right. Use in either hand. Serrated blades. UPC: 7 27226 13068 6

Cuts straight and left curves. Easiest used in right hand. Serrated blades. UPC: 7 27226 13066 2

Cuts straight and right curves. Easiest used in left hand. Serrated blades. UPC: 7 27226 13067 9

Upright aviation snips make cutting in confined or overhead spaces easy. Can be used with blades up or down in a pushing or pulling motion. An ergonomic design improves the users range of wrist motion. blade pivot bolt is threaded into bottom blade keeping blades in adjustment for ease of operation. Top and bottom blades are serrated to hold material during cutting, creating a clean edge. Made in the USA

Utility aviation snips are a good all around snip that cuts wide curves and trim cuts. Compound leverage design makes cutting easy. blade pivot bolt is threaded into bottom blade keeping blades in adjustment for ease of operation. Made in the USA

The duct slitter is perfect for piercing starter holes or slits in light gauge sheet metal or scribe a line. Forged blade with acrylic handle.

Forged steel Head with 8-sided striking face opposite rounded chisel end. Fiberglass shock-absorbing handle with rubber grip. Made in the USA.

Use as a lever to pull duct runs together for cleating. The handle is made of light weight aluminum. Rollers are made of hardened spring steel. Offset handle with Kush'n-Kote textured grip. Made in the USA

Use to scribe mark sheet metal and align holes. Forged of 8630 steel for long-lasting point. Conveniently stores in end of aviation snip grip. Made in the USA

The snap lock punch is engineered to join to sheet metal sides together which is perfect for working with ducts. Kush'n-power grips comfort users hands and reduces fatigue. Made in the USA

The 31-degree notcher cuts a 31-degree v-notch in sheet metal to form connector tabs. A 1-3/16â²â² throat depth ensures a tight fitting connection. Kush'n-power grips comfort users hands and reduces fatigue. Made in the USA

The Stovepipe & duct cutter creates 2 finished edges with one cut while removing 3/16â²â² width of material from the center of the cut. Kush'n-power grips comfort users hands and reduce fatigue. Made in the USA

The five blade crimper crimps duct ends in order form tight fitting joints. Kush'n power grips comfort users hands and reduce fatigue. Made in the USA

Seamer blades 3â²â² long by 1-1/4â²â² wide with a 1-7/16â²â² throat depth. Blades are forged. Kush'n power grips comfort users hands and reduces fatigue. Made in the USA

Seamer blades 6â²â² long by 1-1/4â²â² wide with a 1-7/16â²â² throat depth. Blades are forged. Kush'n power grips comfort users hands and reduces fatigue. Made in the USA

Seamer set includes 3-inch seamer and 6-inch interchangeable blades. Blades are 1-1/4â²â² wide with a throat depth of 1-7/17â²â². Blades are forged. Kush'n-power grips comfort users hands and reduce fatigue. Made in the USA

Offset seamer provides additional leverage when compared to straight models. Blades are 3â²â² long by 1-1/4â²â² wide with a throat depth of 1-7/16â²â². Blades are forged. Kush'n-power grips comfort users hands and reduce fatigue, Made in the USA

Offset seamer provides additional leverage when compared to straight models. Blades are 6â²â² long by 1-1/4â²â² wide with a throat depth of 1-7/16â²â². Blades are forged. Kush'n-power grips comfort users hands and reduce fatigue, Made in the USA

Use straight handle seamer tongs to bend or form sheet metal and other pliable materials. Seamer tongs have 1-1/4â²â² throat depth with 1/4â²â² depth graduations. Made in the USA

The folding tool is made of tempered steel with double sided throat depth presets. Sight gauges on both sides. Made in the USA

The folding tool is made of tempered steel with double sided throat depth presets. Sight gauges on both sides. Made in the USA Capacities : SS Steel 28ga / CR Steel 22ga / Aluminum 22ga / Copper 22ga / Galvanized 22ga

Stainless steel with lined sight gauge and brass depth adjustment screws. Made in the USA Capacities : SS Steel 28ga / CR Steel 22ga / Aluminum 20ga / Copper 20ga / Galvanized 22ga

Interchangeable 3â²â² forged blades for straight or offset seamers

Duckbill Tinner snips are very versatile, they can cut straight, wide, and tight curves in any direction. Duckbill snips are made from high carbon steel to keep them sharp after numerous cuts. Made in the USA

We're putting our Snips where our mouth is! We want you dare customers to take the Midwest SnipsÂ® Challenge. It is FREE and EASY. Here is how it works. 1. Send an email to your NON-Midwest SnipsÂ® customers. See our suggested email message below the red dotted line (you can copy and paste this directly into your email). 2. They will click the link provided in the email to complete the Midwest Challenge form. 3. We will verify their credit and send them 6 FREE tools in the Challenge Kit. Midwest will notify you when your customer requests a kit. We will follow-up with the customer with an easy re-order email after some time has passed. We know that we win way more than we lose when we get our snips in the hands of professionals. This is why we are

MagSnips | Use in a wide range of sheet materials including vinyl or metal siding, metal flashing, asphalt shingles, landscape materials, canvas, etc. Replaceable blades are economical and easy to replace. Light weight magnesium handles reduce fatigue. Offset blade pattern models are tradesman preferred because they flow material away from the blades marking long cuts easier.

Midwest Tools | The Right Tools For Every Job

Our Dir. of Sales & Marketing, Chuck Loparo, was spending time with some young entrepreneurs. The future innovators are participating in the Starting Gate program at Western Michigan University. They focused on the critical aspects of selling. It does not matter if you have a full time sales position or not. Selling yourself, your company, your project...it's an important skill set to work on.

Midwest SnipsÂ® manufactures an extensive line of high quality sheet metal cutting tools used to fabricate and install vinyl and aluminum fence. These tools have been designed to meet the needs of fence material extruders, fence fabricators, professional fence installers and the do-it-yourselfer. The line of sheet metal cutting tools includes our patented pneumatic notchers and rivet gun as well as manual notcher, nibbler, rail end clippers and rivet gun hand tools.

Calm before the crowds at FenceTech 2020 in Salt Lake City. We are rock'n at booth 700. Tradesmen vinyl and aluminum fence tools.

8 x 1/2â²â² Zip Screw (1,000pcs tub) - w/free 1/4â²â² bit

Business Description

Products and Services offered

Midwest Tool and Cutlery Company has been manufacturing tradesman quality tools since 1945. Midwest Tool® products include hot drop-forged aviation and tinner snips, HVAC, roofing, siding, and fence tools. As a leading innovator and manufacturer of metal cutting snips and speciality hand tools, Midwest Tool® has developed and owns numerous product design and utility patents that enhance product performance. Our quality products are Made in the USA.

Business Hours:
M-F 8am-5am, Sa-Su Closed

Categories:
Tool Rental - Leasing,Industrial Equipment - Supplies Dealers,Roofing,Scaffolding - Aerial Lifts, Parts - Supplies,Scaffolding Rental - Leasing,Siding Material Dealers,Gutters - Downspouts Dealers,Fence Materials,Office Furniture,Kitchen Fixtures - Accessories Dealers

Products:
Midwest Snips, Upright Snips, Magsnips, Aviation Snips, Tinner Snips, Tin Snips, Roofing Tools, Hand Tools, Siding Tools, Gutter Tools, Fence Tools, Hvac Tools, Bending And Folding Tools, Flex Duct Tools, Sheet Metal Tools, Portable Work Surface, Fasteners, Bits & Nut Setters, Aluminum Fence Tools, Vinyl Fence Tools, Nopeus Industrial Metal Shear, Power Cutters

Associations:
Asme

midwest@midwestsnips.com
Website
http://midwestsnips.com